Will it fit your kitchen?
Scroll for more
Check your setup before you install
Kitchen sink system compatibility comes down to four essentials: the sink opening, cold-water connection, electrical access, and available space beneath the sink. AQUALOGIC NT systems use installation formats and connections common in U.S. kitchens.
See what your installation needs
Check the core requirements before choosing your SafeBoil™ system or preparing for hot water dispenser installation.
Visit Installation Hub → Visit Installation Hub →- Standard sink opening
- Cold-water connection
- Electrical access for tank-equipped systems
- Under-sink cabinet space

Compatibility and requirements, by system
Safeboil™ Pro Touch and Pro Flex replace your main kitchen faucet, while Safeboil™ Core installs alongside it as a dedicated point-of-use faucet. Compare the requirements before choosing your setup.
REQUIREMENT
Safeboil™ Pro Touch
View System View SystemSafeboil™ Pro Flex
View System View SystemSafeboil™ Core
View System View System4-in-1 tank (double lever variant)
Safeboil™ Pro Touch
Safeboil™ Pro Flex
Safeboil™ Core
4-in-1 tank (double lever variant)
Each Safeboil™ faucet line uses its designated digital hot tank, so do not interchange tanks between systems.
Installing a garbage disposal: what to check
Before installing a garbage disposal, check the sink opening, mounting system, power and control setup, and available clearance beneath the sink. PureGrind™ and PureGrind™ Pro use AQUALOGIC NT's EZ Mount system for straightforward under-sink installation.
-
01
Standard Drain Opening
PureGrind™ fits a standard U.S. kitchen sink drain opening used by most existing garbage disposal installations.
-
02
EZ Mount System
AQUALOGIC NT's EZ Mount system simplifies installation whether you're replacing an existing disposal or fitting one for the first time. Ask your installer to confirm compatibility with your existing sink flange before ordering.
-
03
Power & Control
PureGrind™ and PureGrind™ Pro include the Automatic Disposer Switch (ADS), which controls the disposal without wiring a traditional wall switch.
-
04
Under-Sink Clearance
Allow enough room below the drain for the grind chamber and discharge connection, alongside any SafeBoil™ tank or filtration components sharing the cabinet.
Specifications, FAQs & Downloads
Safeboil™ Pro Touch sink hole: Standard 1-3/8-in single hole
Safeboil™ Pro Flex sink hole: Standard 1-3/8-in single hole
Safeboil™ Core sink hole: Standard 1-3/8-in dedicated secondary hole
Cold-water connection: 3/8-in connection
Pro Touch electrical: 120V / 60Hz, 15A GFCI grounded receptacle
Pro Flex electrical: 120V / 60Hz, 15A GFCI grounded receptacle
Core electrical: 120V / 60Hz, 15A GFCI grounded receptacle — tank-equipped configurations only
Pro Touch tank pairing: 4-in-1 Digital Hot Tank
Pro Flex tank pairing: 3-in-1 Digital Hot Tank
Core tank pairing: 3-in-1 Digital Hot Tank (hot-only and single-lever versions) or 4-in-1 tank (double-lever version)
PureGrind mounting system: EZ Mount
PureGrind feed type: Continuous feed
Dishwasher drain inlet: Standard on U.S. disposals — confirm compatibility with your installer
Safeboil™ Pro Touch and Pro Flex fit a standard 1-3/8-inch single faucet hole. Safeboil™ Core uses a standard 1-3/8-inch dedicated hole alongside your existing kitchen faucet.
Most U.S. kitchen cabinets can accommodate the required under-sink components. Pro Touch and Pro Flex need space for the digital hot tank and filter, while Core needs the filter plus a tank only when configured for near-boiling water. If your cabinet is unusually shallow or already crowded, check the available space before ordering.
AQUALOGIC NT systems are compatible with many RO systems; flow and tank recovery may be reduced by the RO system’s pressure and flow.
Tank-equipped Safeboil™ systems plug into the required grounded receptacle and do not require hardwiring. Pro Touch and Pro Flex use a 120V / 60Hz, 15A GFCI grounded receptacle; Core requires electrical access only when paired with a digital hot tank (3-in-1 or 4-in-1).
Confident DIY homeowners familiar with basic plumbing can complete many AQUALOGIC NT installations using the available step-by-step guidance. AQUALOGIC NT recommends a plumber for first-time installations, and the Installation Hub provides videos, instructions, and technical documents.
PureGrind™ and PureGrind™ Pro use the EZ Mount system. If you're replacing an existing disposal, ask your installer to confirm whether EZ Mount fits your current sink flange directly or requires an adapter.