Boiling water, engineered to be safe.
Scroll for more
Safety starts before boiling water reaches the spout
AQUALOGIC NT builds boiling water faucet safety around deliberate activation at the faucet and independent protection inside the digital hot tank. Together, these controls manage activation and temperature while guarding against overheating and dry-boil conditions.
See AQUALOGIC NT safety technology in action
See how SafeBoil™ controls, digital hot tank protection, and PureGrind™ safety systems work together to support more controlled everyday use.
- Deliberate boil activation
- Automatic safe reset
- Hot tank temperature monitoring
- Dry-boil protection

Boiling water safety, by system
Every SafeBoil™ configuration that dispenses near-boiling water requires deliberate activation before flow begins. The control method changes by system, while each tank-equipped configuration adds independent temperature monitoring and dry-boil protection.
FEATURE
SafeBoil™ Pro Touch
View System → View System →SafeBoil™ Pro Flex
View System → View System →SafeBoil™ Core
View System → View System →4-in-1 tank (double lever variant)
SafeBoil™ Pro Touch
SafeBoil™ Pro Flex
SafeBoil™ Core
4-in-1 tank (double lever variant)
SafeBoil™ Pro Touch confirms boiling-water activation electronically: the red LED pulses on contact and turns solid once the system is armed. Releasing the control stops the flow immediately.
SafeBoil™ Pro Flex and tank-equipped SafeBoil™ Core configurations use a spring-loaded lever with a built-in delay before near-boiling water flows. The lever returns to a safe position when released.
Behind the faucet, the digital hot tank continuously monitors its temperature. A dedicated sensor and BiPolar Thermal Cut-Off (TCO) help regulate heat and protect against overheating, while insulation and the dual-polarity TCO provide dry-boil protection.
Garbage disposal safety built into PureGrind™
PureGrind™ and PureGrind Pro combine protection around the grind chamber with independent motor safeguards for more controlled everyday operation.
-
01
Magnetic Metal-Object Protection
A magnetic guard intercepts stray flatware and small metal objects before they reach the grind chamber, helping prevent jams and damage.
-
02
Dual Thermal Overload Protection
Two independent thermal cut-outs monitor the motor and automatically shut it down before it can overheat.
-
03
Continuous-Feed Design
Continuous feed accepts food waste while the disposal runs, creating a steadier workflow with less manual handling near the grind chamber.
-
04
Quiet Operation
Quiet operation makes unusual sounds easier to notice during everyday use.
Specifications, FAQs & Downloads
Maximum hot tank output: Up to 208°F (98°C)
Hot water tank temperature control: Temperature sensor + BiPolar Thermal Cut-Off (TCO)
Dry-boil protection: Insulation + dual-polarity TCO
Electrical isolation: BiPolar TCO
Disposal motor protection: Dual thermal overload cut-out
Pro Touch controls: ADA compliant
Certifications across the AQUALOGIC NT range: ETL · CSA · CE
SafeBoil™ configurations with a boiling-water function require deliberate activation before near-boiling water flows. Pro Touch uses Touch & Hold control with LED confirmation, while Pro Flex and tank-equipped Core configurations use a spring-loaded lever with a built-in delay. Releasing the control returns the system to a non-boiling state.
The intentional-activation design helps prevent an accidental touch or bump from releasing boiling water. As with any appliance dispensing water up to 208°F (98°C), children should not operate the boiling-water function without supervision.
The digital hot tank monitors its temperature through a dedicated sensor. A BiPolar Thermal Cut-Off provides an independent hardware safeguard that regulates heat and cuts power if the system exceeds safe operating conditions.
Dry-boil protection helps protect the heating element when the tank does not contain sufficient water. The system combines insulation with a dual-polarity Thermal Cut-Off as part of the tank protection design.
Magnetic metal-object protection helps intercept stray flatware and small metal objects before they reach the grind chamber. Dual thermal overload protection uses two independent thermal cut-outs to shut the motor down before overheating.
SafeBoil™ Pro Touch uses ADA-compliant touch controls. SafeBoil™ Pro Flex and SafeBoil™ Core are not ADA-rated.